you have 0 items in your cart
Enlight PN: 843H2001A 430-Watt ATX 12V Power Supply PCI-E 4x SATA i7
ProductTitle

Enlight PN: 843H2001A 430-Watt ATX 12V Power Supply PCI-E 4x SATA i7

$69.00

Quantity:
Availability: 1000 In Stock


Enlight PN: 843H 2001A


RoHS
Lead-Free

430 Watts output.

Supports PCI-Express video card
Supports up to four (4) SATA drives
I/O Switch for manual shut-down

Built-in Quad Protection
Backward compatible with 20pin motherboard

 Thermostatically control 8-cm fan
Connectors Summary
Connector Name Quantity
20pin & 24pin Dual-Use Main Connector
1
Peripheral Power Connector 3
Floppy Drive Power Connector 1
Serial ATA Power Connector 4
4pin & 8pin Dual-Use 12V Power Connector
1
PCI-Express Power Connector 1



Specification


  • 430 Watts peak output.
Automatic fan speed control (AFC) with built-in thermostat

AC Input (115v/ 230v switchable):
115V @ 60 Hz - 9A max, or
230V @ 50Hz  - 5A max

Output
Voltage		 Load Range
MAX		 Regulation Ripple
Peak-to-Peak
Max.
1. +5V 20.0A +5% ~ -5% 50 mV
2. +12V1 18.0A +5% ~ -5% 200 mV
3. +12V2
 18.0A +5% ~ -5% 200 mV
4. -12V 0.8A +10% ~ -10% 200 mV
5. +5VSB 2.0A +5% ~ -5% 100 mV
6. +3.3V 20.0A +5% ~ -5% 100 mV

12V1 & 12V2 combined maximum power output is 300-Watts
5V & 3.3V combined maximum power output is 130-Watts

MTBF Life Expectancy of this model:
100,000 hours* (11 years & 2 months)
*exclude the life of the fan which is affected by environment.

Operating temperature range:
10oC - 50oC (50oF - 122oF)

Efficiency: 65 % minimum when measured at full load

High standard of quality with FCC, UL, cUL, and CE Certification.

 
RoHS
Lead-Free
  Lead-FREE
 Cadium-FREE
 Mercury-FREE
 Hexavalent chromium-FREE
 PBB-FREE
 PBDE flame retardants-FREE		 RoHS Compliant - made with hazardous-free components
 RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well.


Protection:

Input Protection
In primary circuit of the power supply , a protected fuse is inserted. Only internal fault of the power supply will cause the fuse to be blown.

Output Protection
Over Voltage Protection: The +5V/+12V/+3.3V DC outputs are protected against the over voltage condition . Maximum value can't be over 6.8V at 5V terminal ,15.6V at 12V and 4.5V at 3.3V.
Over Power Protection: As a protection against excessive power delivery due to output short circuit or over load usage, this power supply can electronically limit the output current to not surged to exceed 60% of its designed output power.  
Short Circuit Protection: Short circuit placed on any DC output will shut down all DC outputs and latch.  After that, the unit may need to be removed from system or unused for some time before it can be used again.
Over Current Protection: Current protection is designed to limit the current to ensure the system operate within safe operating conditions.  The recommended over current protection scheme is for the power supply to latch into the shutdown state.  After that, the unit may need to be removed from system or unused for some time before it can be used again.  The setting of over current protection for each output rail is as following:  +5V is less than or equal to 50A ,  +3.3V is less than or equal to 60A,+12V is less than or equal to 40A.


Physical Dimensions

  • Standard ATX dimensions: 150(W) x 86(H) x 140(D) mm







ASI SKU/Short Number: 100541


Volume Discount Dealer Pricing ? 
YES.  Scroll up to the top of the page, enter quantity more than 1, and add to cart to see corresponding discount unit price.