you have 0 items in your cart
ROCK POWER 500W Dual-Fan Micro ATX SFX Power Supply SFX-230M2 upgrade

ROCK POWER 500W Dual-Fan Micro ATX SFX Power Supply SFX-230M2 upgrade

$49.00

Free HIGH POWER pen ?
Quantity:
Availability: 999 In Stock

SFX-500-N66S

 

ROCK POWER model: SFX-500-N66S
SFX Micro ATX Power Supply for Name Brand Computers such as eMachines eTower
 or Standard Clone Slim Desktop PC

 

  • 500 watts peak
  • Dual 60mm Fan
  • Dual Rail 12V
  • For 110V region only.
  • Dual use - 20pin or 24pin
  • S-ATA HD support
  • RoHS lead-free

sfx-500-n66s
Rear 60mm fan blows warm air straight out

 sfx-500-n66s

A secondary 60mm fan located in the front, drawing air into the power supply


Dimension: 4.9" Length x 5.1" Depth x 2.5" Height











Completely upgradable:


  1. If you later upgrade your PC to a newer 24pin motherboard, this power supply will still work with it.
  2. If you later install a new SATA hard drive, this power supply will still work with it.









Supports faster SATA hard drive.

  With built-in FAN CONTROLLER for both fans:
You do not need 3 pin fan connector to operate this power supply. 



> Features
Complies with SFX 12V V2.0
High Reliability.
Capable to operate with no or minimum load. Capable to start in low 0 degree C temperature.
Remote On/Off
Low Acoustic Noise with dual (2) 60mm fans -- 1 front and 1 back
Fan Speed Control Function Inside
> Environmental
MTBF: 100,000 hours except the life of the fan which vary depending on how dusty the environment is.
> Electrical Specification
Input :
Input range: 100-127Vac
Frequency: 47~63Hz
Input current: 6A
Efficiency: >65% @ Max. Load
Output :
Maximum Power: 500 Watts Peak
Holdup Time: >16mS @ Max.Load
Rise Time: 0.1mS ~ 20mS
Protection:
* Short-Circuit Protection -
+5V,+12V1,+12V2,-12V &+3.3V will latch off,+5VSB will auto-recovery
* Over Voltage Protection -
When output voltage exceeds threshold points, the output will latch and system shuts down.
* Over Power Protection -

When total output power surges to 500w, the unit will shut down.

Power Good Signal:
TTL Compatible on delay 100mS to 500mS, off delay 1mS minimum



VOLTAGE
+5V
+12V1
+12V2
+3.3V
-12V
+5Vsb
MAX.LOAD
15.0A
11.0A
13.0A
21A
0.3A
2.0A
MIN.LOAD
0.3A
1.0A
1.0A
0.5A
0A
0.1A
REGULATION
 5%
 5%
 5%
 5%
 10%
 5%
RIPPLE&NOISE(mV)
100
240
240
100
240
100

Total combined power on +3.3V & +5V rails are 103W maximum
Total combined power on +12V1 & +12V2 rails are 216W maximum
All specifications are subject to change without prior notice.
 



Connectors Summary

Connector Name Quantity Picture
4-pin ATX12V Power Connector 1
Serial ATA Power Connector

2





Note:The original power supply may have a P8 4 pin video power connector.
In most cases the P8 connector is not connected to anything and this replacement work perfect with the system. Check with your system for requirement.
Connector Name Quantity Picture
20-pin / 24-pin Dual-use ATX Main connector

1
Peripheral Power Connectors for standard IDE (Parallel ATA) hard drives or optical drives
3
Floppy Drive Power Connectors
1

Lead-FREE
Cadium-FREE
Mercury-FREE
Hexavalent chromium-FREE
PBB-FREE
PBDE flame retardants-FREE
RoHS Compliant - made with hazardous-free components
RoHS is the Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment. This has been a standard in Europe and is now becoming a standard in the world. Not only lead, but cadium, mercury, hexavalent chromium, polybrominated biphenyl (PBB), and polybrominated diphenyl ether (PBDE) flame retardants are limited as well.

This model is manufactured by HIGH POWER®